Mohammad Jafar Hadianfard

Teacher description

Virtual Room : http://vroom.shirazu.ac.ir/hadianfard

Articles And Books

Articles

Mohammad Jafar Hadianfard ,Failure Analysis of a High Pressure Orifice Flange of an Oil Refinery ,Key Engineering Materials ,vol. 0 ,2010 ,pp. 125-128 ,
Mohammad Jafar Hadianfard ,Characterization of Fe–Cr–Mn–N amorphous powders with a wide supercooled ,Materials Science and Engineering A ,vol. 0 ,2010 ,pp. 1135-1142 ,
Mohammad Jafar Hadianfard ,Contribution of nitrogen concentration to compressive elastic modulus ,Materials and Design ,vol. 0 ,2010 ,pp. 2241-2244 ,
Mohammad Jafar Hadianfard ,The influence of Al content and CaO–SiO2 on the magnetic and structural ,Journal of Alloys and Compounds ,vol. 0 ,2009 ,pp. 539-542 ,
Mohammad Jafar Hadianfard ,Microstructural thermal and magnetic properties of amorphous/nanocrystalline ,Journal of Alloys and Compounds ,vol. 0 ,2009 ,pp. 617-624 ,
Mohammad Jafar Hadianfard ,Microstructure and wear behavior of a porous nanocrystalline nickel-free ,Materials and Design ,vol. 0 ,2010 ,pp. 2259-2263 ,
Mohammad Jafar Hadianfard ,The effect of nitrogen on the glass-forming ability and micro-hardness of ,Materials Chemistry and Physics ,vol. 0 ,2009 ,pp. 71-75 ,
Mohammad Jafar Hadianfard ,The effect of sintering time on the densification and mechanical properties ,Materials and Design ,vol. 0 ,2010 ,pp. 527-532 ,
Mohammad Jafar Hadianfard ,Failure in a high pressure feeding line of an oil refinery ,Engineering Failure Analysis ,vol. 0 ,2010 ,pp. 873-881 ,
Mohammad Jafar Hadianfard ,Microstructural phase evaluation of high-nitrogen Fe–Cr–Mn ,Journal of Materials Science ,vol. 0 ,2009 ,pp. 136-148 ,
Mohammad Jafar Hadianfard ,influence of strain rate on shear localization during ,materials sicence forum ,vol. 0 ,2006 ,pp. 1047-1052 ,
Mohammad Jafar Hadianfard ,structural failure of telescopic shiploader during installation ,Failure analysis and prevention ,vol. 0 ,2007 ,pp. 282-291 ,
Mohammad Jafar Hadianfard ,Effects of strain rate on mechanical properties and failure mechanism of structural Al?Mg alloys ,Materials Science and Engineering A ,vol. 0 ,2008 ,pp. 283-292 ,
Mohammad Jafar Hadianfard ,Low cycle fatigue behavior and failure mechanism of a dual-phase steel ,Materials Science and Engineering A ,vol. 0 ,2008 ,pp. 493-499 ,
،Abdolabbas Jafari،Mohammad Jafar Hadianfard ,Prediction of pitting corrosion of surface treated AISI 316L stainless steel by artificial neural network ,Corrosion Engineering Science and Technology ,vol. 0 ,2011 ,pp. 762-766 ,
erfan salahinejad،Ehsan Askari Bajestani،Mohammad Jafar Hadianfard ,Microstructural and hardness evolution of mechanically alloyed Fe–Cr–Mn–N ,Journal of Alloys and Compounds ,vol. 0 ,2010 ,pp. 369-372 ,
Rasool Amini، ،Mohammad Jafar Hadianfard،Ehsan Askari Bajestani ,A novel approach to quantify nitrogen distribution in ,Journal of Alloys and Compounds ,vol. 0 ,2011 ,pp. 2284-2251 ,
rasoul Amini، ،Ehsan Askari Bajestani،Mohammad Jafar Hadianfard ,On the general outline of physical properties of amorphous-nanocrystalline ,Journal of Alloys and Compounds ,vol. 0 ,2011 ,pp. 3252-3256 ,
،Mohammad Jafar Hadianfard ,Corrosion behaviour of stainless steel after plastic deformation ,materials performance NACE International ,vol. 0 ,2010 ,pp. 2-7 ,
،Rasool Amini،Mohammad Jafar Hadianfard ,Crystal interstitial sites contribution to nitrogen supersaturation in mechanically ,Journal of Alloys and Compounds ,vol. 0 ,2010 ,pp. 584-587 ,
،Rasool Amini،Mohammad Jafar Hadianfard ,Effect of milling time on structure and mechanical properties of porous ,Materials Science and Engineering A ,vol. 0 ,2010 ,pp. 5522-5527 ,
reza taherian،Mohammad Jafar Hadianfard ,The Optimization of Ball Milling Method in Preparation of ,International Journal of Engineering Research in Africa ,vol. 0 ,2011 ,pp. 16-29 ,
،Mohammad Jafar Hadianfard ,َPrediction of pitting corrosion of surface treated AISI 316L stainless steel by artificial neural network ,Corrosion Engineering Science and Technology ,vol. 0 ,2011 ,pp. 734-739 ,
reza taherian،Ahmad Nozad Golikand،Mohammad Jafar Hadianfard ,The effect of mold pressing pressure and composition on properties ,Materials and Design ,vol. 0 ,2011 ,pp. 3883-3892 ,
Arash Yazdani،Mohammad Jafar Hadianfard ,A new model in Glass forming range of binary alloys ,Trends in Applied Sciences Research ,vol. 0 ,2012 ,pp. 1-6 ,
erfan salahinejad،Mohammad Jafar Hadianfard،D. Macdonald،kayvan karimi، Vashaee، Tayebi ,Aqueous sol–gel synthesis of zirconiumtitanate (ZrTiO4 ,Ceramics International ,vol. 0 ,2012 ,pp. 6145-6149 ,
erfan salahinejad،Mohammad Jafar Hadianfard،Ghaffari m،shirazeh bagheri mashhadi، Okyay ,Compositional homogeneity in a medical-grade stainless steel sintered with a ,Materials Science and Engineering C ,vol. 0 ,2012 ,pp. 2215-2219 ,
erfan salahinejad،Mohammad Jafar Hadianfard،Ghaffari m،shirazeh bagheri mashhadi، Okyay ,Fabrication of Nanostructured Medical-Grade Stainless Steel ,METALLURGICAL AND MATERIALS TRANSACTIONS A ,vol. 0 ,2012 ,pp. 294-298 ,
erfan salahinejad،Mohammad Jafar Hadianfard،Ghaffari m،shirazeh bagheri mashhadi، Okyay ,Liquid-phase sintering of medical-grade P558 stainless steel using a new ,Materials Letters ,vol. 0 ,2012 ,pp. 209-212 ,
erfan salahinejad،Mohammad Jafar Hadianfard،D. Macdonald،M Mozafari، Vashaee، Tayebi ,Zirconium titanate thin film prepared by anaqueou spar ticulatesol–gelspin ,Materials Letters ,vol. 0 ,2012 ,pp. 5-8 ,
erfan salahinejad،rasool amini،Mohammad Jafar Hadianfard ,Structural evolution during mechanical alloying of stainless steels under nitrogen ,Powder Technology ,vol. 0 ,2012 ,pp. 247-253 ,
reza taherian،Mohammad Jafar Hadianfard،Ahmad Nozad Golikand ,A new equation for predicting electrical condactivity ,Journal of Applied Polymer Science ,vol. 0 ,2012 ,pp. 1497-1509 ,
Arash Yazdani،Mohammad Jafar Hadianfard،erfan salahinejad ,A system dynamics model to estimate energy temperature and particle size ,Journal of Alloys and Compounds ,vol. 0 ,2013 ,pp. 108-111 ,
erfan salahinejad،Mohammad Jafar Hadianfard،D. Macdonald،M Mozafari، Vashaee، Tayebi ,A new double-layersol–gelcoating to improve the corrosion resistance of a medical-grade stainless steel in a simulated body fluid ,Materials Letters ,vol. 0 ,2013 ,pp. 162-165 ,
erfan salahinejad،Mohammad Jafar Hadianfard،S.Mahmoud Ghaffari،rasool amini،shirazeh bagheri mashhadi، Okyay ,Microstructural characterization of medical-grade stainless steel ,Advanced Powder Technology ,vol. 0 ,2013 ,pp. 605-608 ,
erfan salahinejad،Mohammad Jafar Hadianfard،D. Macdonald،M Mozafari، Vashaee، Tayebi ,Multilayer zirconiumtitanate thin film sprepared by asol–gel ,CERAMICS INTERNATIONAL ,vol. 0 ,2013 ,pp. 1271-1276 ,
mina shiran chaharsoghi،Mohammad Jafar Hadianfard، ,Synthesis of Nanocrystalline Electron Emissive Materials ,international journal of chemical engineering and applications ,vol. 0 ,2013 ,pp. 88-91 ,
reza taherian،Ahmad Nozad Golikand،Mohammad Jafar Hadianfard ,Manufacture of a polymer-based carbon nanocomposite as bipolar plate ,MATERIALS & DESIGN ,vol. 0 ,2013 ,pp. 242-251 ,
erfan salahinejad،Mohammad Jafar Hadianfard،D. Macdonald، Sharifi-Asl،M Mozafari، Walker، Rad، Madihally ,In Vitro Electrochemical Corrosion and Cell Viability ,PLOS ONE ,vol. 0 ,2013 ,pp. 616331-616338 ,
reza taherian،Ahmad Nozad Golikand،Mohammad Jafar Hadianfard ,Preparation and Properties of a Phenolic/Graphite Nanocomposite ,ECS Journal of Solid State Science and Technology ,vol. 0 ,2012 ,pp. 39-46 ,
،Mohammad Jafar Hadianfard،Vashaeed ،L Tayebi ,Influence of annealing temperature on the structural and anti-corrosioncharacteristics of sol–gel derived spin-coated thin films ,CERAMICS INTERNATIONAL ,vol. 0 ,2014 ,pp. 2885-2890 ,
mina shiran chaharsoghi،Mohammad Jafar Hadianfard، ,Synthesis of Nanocrystalline Electron Emissive Materialswith Homogenous Composition in Nanoscale ,international journal of chemical engineering and applications ,vol. 0 ,2013 ,pp. 88-91 ,
mina shiran chaharsoghi،Mohammad Jafar Hadianfard، ,Study the Effect of Nano Emissive Materials on M-Type Cathode ,Advanced Material Research ,vol. 0 ,2014 ,pp. 772-777 ,
،Mohammad Jafar Hadianfard،Vashaeed ،L Tayebi ,Effect of precursor solution pH on the structural and crystallizationcharacteristics of sol–gel derived nanoparticles ,JOURNAL OF ALLOYS AND COMPOUNDS ,vol. 0 ,2014 ,pp. 182-184 ,
mohsen javanbakht،Mohammad Jafar Hadianfard،erfan salahinejad ,Microstructure and mechanical properties of a new group of nanocrystalline medical-grade stainless steels prepared by powder metallurgy ,JOURNAL OF ALLOYS AND COMPOUNDS ,vol. 0 ,2015 ,pp. 17-21 ,
Mansour Rahsepar،mohammad asgharzadeh،Mohammad Jafar Hadianfard،Seyed Ahmad Jenabali Jahromi ,Failure Analysis of Disbondment of Three-Layer Polyethylene Coatings from the Surface of Buried Steel Pipelines ,Journal of Failure Analysis and Prevention ,vol. 0 ,2015 ,pp. 604-611 ,
sahar ziraki،Seyed Mojtaba Zebarjad،Mohammad Jafar Hadianfard ,A Study on the Tensile Properties of Silicone Rubber/Polypropylene Fibers/Silica Hybrid Nanocomposites ,JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS ,vol. 0 ,2016 ,pp. 289-296 ,
alireza araghi،Mohammad Jafar Hadianfard ,Fabrication and characterization of functionally gradedhy droxyapatite/TiO2 ,CERAMICS INTERNATIONAL ,vol. 0 ,2015 ,pp. 12668-12679 ,
mohsen javanbakht، ،Mohammad Jafar Hadianfard ,The effect of sintering temperature on the structure and mechanical properties ,Powder Technology ,vol. 0 ,2016 ,pp. 37-43 ,
sahar ziraki،Seyed Mojtaba Zebarjad،Mohammad Jafar Hadianfard ,A study on the role of polypropylene fibers and silica nanoparticles on the compression properties of silicone rubber composites as a material of finger joint implant ,International Journal of Polymeric Materials and Polymeric Biomaterials ,vol. 0 ,2017 ,pp. 48-52 ,
sahar ziraki،Seyed Mojtaba Zebarjad،Mohammad Jafar Hadianfard ,On the Role of Both Polypropylene Fibers and Silica Nanoparticles on the Viscoelastic Behavior of Silicone Rubber Nanocomposites ,POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING ,vol. 0 ,2016 ,pp. 1693-1699 ,
mohsen javanbakht،erfan salahinejad،Mohammad Jafar Hadianfard ,The effect of sintering temperature on the structure and mechanical properties of medical-grade powder metallurgy stainless steels ,Powder Technology ,vol. 0 ,2016 ,pp. 37-43 ,
Faranak Foroughi،Mansour Rahsepar،Mohammad Jafar Hadianfard،Hasuck Kim ,Microwave-assisted synthesis of graphene modified CuO nanoparticles for voltammetric enzyme-free sensing of glucose at biological pH values ,Microchimica Acta ,vol. 0 ,2018 ,pp. 0-0 ,
، ،Mohammad Jafar Hadianfard،J Amighian ,Synthesis and characterization of NiAlxFe2?xO4 magnetic spinel ferrites produced by conventional method ,Powder Technology ,vol. 0 ,2018 ,pp. 110-114 ,
AmirAli Ashraf،Seyed Mojtaba Zebarjad،Mohammad Jafar Hadianfard ,The cross-linked polyvinyl alcohol/hydroxyapatite nanocomposite foam ,Journal of Materials Research and Technology ,vol. 0 ,2019 ,pp. 3149-3157 ,
Mohammad Jafar Hadianfard، ،Mozhgan Moradzaman ,Effect of Chemical and mechanical funtionalization on carbon nanotubes ,BOLETIN DEL GRUPO ESPANOL DEL CARBON ,vol. 0 ,2019 ,pp. 21-25 ,
zohreh zangiabadi،Mohammad Jafar Hadianfard ,The role of hollow silica nanospheres and rigid silica nanoparticles on acoustic wave absorption of flexible polyurethane foam nanocomposites ,Journal of Cellular Plastics ,vol. 0 ,2020 ,pp. 395-410 ,
Faranak Foroughi،Mansour Rahsepar،Mohammad Jafar Hadianfard،Hasuck Kim ,Facile Synthesis and Electrochemical Performance of Graphene-Modified Cu2O Nanocomposite for Use in Enzyme-Free Glucose Biosensor ,IRANIAN JOURNAL OF CHEMISTRY & CHEMICAL ENGINEERING-INTERNATIONAL ENGLISH EDITION ,vol. 0 ,2020 ,pp. 0-0 ,
leyla heidary،Amir Tangestani،Mohammad Jafar Hadianfard،D. Vashaee، Tayebi ,Effect of fabrication method on the structure and properties of a nanostructured nickel-free stainless steel ,Advanced Powder Technology ,vol. 0 ,2020 ,pp. 3408-3419 ,
Babak Azizi،Sasan Rezaee،Mohammad Jafar Hadianfard،Kianosh Hatamidehno ,A comprehensive study on the mechanical properties and failure mechanisms of graphyne nanotubes (GNTs) in different phases ,COMPUTATIONAL MATERIALS SCIENCE ,vol. 0 ,2020 ,pp. 10794-0 ,
Mohammad Jafar Hadianfard،reza kavousi heydari، ,Effect of Fabrication Method and Porosity Content on Elastic Modulus of a Nano-Particle Dispersed Nickel Base Alloy ,Iranian Journal Of Materials Forming ,vol. 0 ,1400 ,pp. 12-21 ,
leyla heidary،Mohammad Jafar Hadianfard،alireza khalifeh،Daryoosh Vashaee،Lobat Tayebi ,Fabrication of nanocrystalline austenitic stainless steel with superior strength and ductility via binder assisted extrusion method ,Powder Technology ,vol. 0 ,2021 ,pp. 38-48 ,
Amir Tangestani،Mohammad Jafar Hadianfard ,Hydroxyapatite/titania nanocomposite coating on nickel-free austenitic stainless steel ,Surface and Coatings Technology ,vol. 0 ,2021 ,pp. 126849-0 ,
Amir Tangestani،Mohammad Jafar Hadianfard،Lobat Tayebi،Daryoosh Vashaee ,Wear and Electrochemical Behavior of High-Nitrogen Nickel-Free Austenitic Stainless Steel Produced by Hot Powder Forging ,Journal of Materials Engineering and Performance ,vol. 0 ,2022 ,pp. 7254-7262 ,
Behnam Hosseinzaei،Mohammad Jafar Hadianfard، Aghabarari،Miguel Garc?a-Roll´an،Ramiro Ruiz-Rosas،Juana M?. Rosas،Jos´e Rodr?guez-Mirasol،Tom´as Cordero ,Pyrolysis of pistachio shell orange peel and saffron petals for bioenergy production ,Bioresource Technology Reports ,vol. 0 ,2022 ,pp. 101209-0 ,
Behnam Hosseinzaei،Mohammad Jafar Hadianfard،Feridun Esmaeilzadeh،T Cordero، Ruiz-Rosas،Rosas Rodr?guez ,Assessment of Agricultural Residue to Produce Activated Carbon-Supported Nickel Catalysts and Hydrogen Rich Gas ,Catalysts ,vol. 0 ,2023 ,pp. 854-0 ,
Amir Tangestani،Mohammad Jafar Hadianfard،Daryoosh Vashaee ,Microstructure mechanical and magnetic properties of a nickel-free austenitic stainless steel fabricated by hot powder forging ,Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering ,vol. 0 ,2023 ,pp. 0-0 ,

Conferences

Mohammad Ebrahim BAHROLOLOOM،Mohammad Jafar Hadianfard ,Investigating And Comparing of Ni/Al 2O3 electro-composites by two approaches-parallel plate electrodes and rotating electrodes ,Proceedings of the international conference on recent advances in Mechanical & Materials engineering ,
Mohammad Jafar Hadianfard ,Corrosion study of different metallic biomaterials in Hanks solution ,Iranian Corrosion/2007 ,
reza taherian،Mohammad Jafar Hadianfard ,Investigation of effect of ball milling and functionalizing on electrical thermal and ,The 2nd International Conference on Composites CCFA-2 ,
reza taherian،Gholamreza Karimi،Mohammad Jafar Hadianfard ,The effect of bipolar plate material and clamping pressure on the ,International Chemical Engineering Congress & Exihibition ,
Fatemeh sadat Talatori،Mohammad Jafar Hadianfard ,Structural evaluation and dielectric properties of nanostructural Li0.05Ni0.95O ,Nanostructure and Nonmaterials ,
Arash Yazdani،Mohammad Jafar Hadianfard ,A New Model in Glass Forming Range of Binary Alloys ,Advanced Manufacturing Technology and Systems (AMTS 2012) ,
sahar ziraki،Seyed Mojtaba Zebarjad،Mohammad Jafar Hadianfard ,A Study on the Role of Polypropylene Fiber on the Deformation Mechanism of Silicone Rubber composites ,3rd International Conference on Nanotechnology Technology and Advanced Materials (ICNTAM 2014) ,
reza taherian،Gholamreza Karimi،Mohammad Jafar Hadianfard،Nozad Golikand ,The effect of bipolar plate material and clamping pressure on the performance of proton exchange membrane fuel cell ,7th International Chemical Engineering Congress & Exihibition ,
Faranak Foroughi،Mohammad Jafar Hadianfard،Mansour Rahsepar ,Enzyme-Free Glucose Biosensor based on Cu2O Nanoparticles ,Chemistry and Chemical Engineering ,
leyla heidary،Mohammad Jafar Hadianfard ,Fabrication of Nickel-based Superalloy Reinforced with Nano yttrium oxide by making paste of Superalloy powder and polymer ,7th International conference on materials engineering and metallurgy ,
Adnan AlizadehNaini،Mohammad Jafar Hadianfard،sara hashemi، ، ,Hydrogels reinforced with TiO2-NPs for wound healing application ,Tissue Engineering and Regenerative Medicine ,
Adnan AlizadehNaini،Mohammad Jafar Hadianfard ,A Hydrogels reinforced with TiO2 ,4th Nanomedicine and Nanosafety Conference (NMNS 2023) ,

Offered Courses

Name

Showing 13 results.

Items per Page (Changing the value of this field will reload the page.)

First Previous Next Last

Name

Mechanical Properties of Materials 2	100231211	3	1	هفتگی - 1 (یک شنبه - 0730 الی 0900) \| هفتگی - 3 (سه شنبه - 0730 الی 0900) \| هفتگی - 4 (چهار شنبه - 1700 الی 1830)	1401/10/18 (1400 - 1700)	First Term 1401
Mechanical Properties of Materials Lab.	100231191	1	2	هفتگی - 4 (چهار شنبه - 1300 الی 1600)	(0000 - 0000)	First Term 1401
Modern Techniques of Materials Characterization and Lab.	100242421	3	1	هفتگی - 1 (یک شنبه - 1600 الی 1730) \| هفتگی - 3 (سه شنبه - 1600 الی 1730)	1401/10/27 (0800 - 1100)	First Term 1401
Solidification Processing	100242181	3	1	هفتگی - 1 (یک شنبه - 1030 الی 1200) \| هفتگی - 3 (سه شنبه - 1030 الی 1200)	1401/10/18 (0800 - 1100)	First Term 1401
Mechanical Properties of Materials 2	100231211	3	1	هفتگی - 1 (یک شنبه - 0730 الی 0900) \| هفتگی - 3 (سه شنبه - 0730 الی 0900) \| هفتگی - 4 (چهار شنبه - 1700 الی 1830)	1400/10/19 (1400 - 1700)	First Term 1400
Modern Techniques of Materials Characterization and Lab.	100242421	3	1	هفتگی - 1 (یک شنبه - 1600 الی 1730) \| هفتگی - 3 (سه شنبه - 1600 الی 1730)	1400/10/28 (0800 - 1100)	First Term 1400
Solidification Processing	100242181	3	1	هفتگی - 1 (یک شنبه - 1030 الی 1200) \| هفتگی - 3 (سه شنبه - 1030 الی 1200)	1400/10/18 (0800 - 1100)	First Term 1400
Advanced Methods for Material Analysis	100231261	2	1	هفتگی - 3 (سه شنبه - 1600 الی 1800)	1400/04/25 (1100 - 1400)	Second Term 1399
Mechanical Properties of Materials Lab.	100231191	1	1	هفتگی - 4 (چهار شنبه - 1300 الی 1600)	(0000 - 0000)	Second Term 1399
Modern Techniques of Materials Characterization and Lab.	100242081	3	1	هفتگی - 1 (یک شنبه - 1030 الی 1200) \| هفتگی - 3 (سه شنبه - 1030 الی 1200)	1400/04/26 (1400 - 1700)	Second Term 1399
Mechanical Properties of Materials 2	100231211	3	1	هفتگی - 1 (یک شنبه - 0730 الی 0900) \| هفتگی - 3 (سه شنبه - 0730 الی 0900)	1399/10/14 (1400 - 1700)	First Term 1399
Modern Techniques of Materials Characterization and Lab.	100242421	3	1	هفتگی - 1 (یک شنبه - 1600 الی 1730) \| هفتگی - 3 (سه شنبه - 1630 الی 1800)	1399/10/24 (0800 - 1100)	First Term 1399
Solidification Processing	100242181	3	1	هفتگی - 1 (یک شنبه - 1030 الی 1200) \| هفتگی - 3 (سه شنبه - 1030 الی 1200)	1399/10/13 (0800 - 1100)	First Term 1399

Showing 13 results.

Items per Page (Changing the value of this field will reload the page.)

First Previous Next Last

Thesis

Showing 1 - 20 of 182 results.

Items per Page 20

First Previous Next Last

FirstName And Last Name	Project Name	Degree	Enterance Year

	Study of Adhesive Joints in Epoxy-E/glass Fiber Composites	M.S	0
	THE EFFECTS OF ENVIRONMENTAL FACTORS, TEMPERATURE AND TIME OF CURING, ON THE MECHANICAL STRNGTH OF A FIBERGLASS EPOXY COMPOSITE	M.S	0
	PRODUCTION OF COMPOSITE INTERVERTEBRAL CERVICAL FUSION CAGE AND ASSESSMENT OF ITS PROPERTIES	M.S	0
	Increasing Corrosion Resistance of Stainless Steel by Surface Treatment and Modeling by Neural Network	Ph.D	0
	FABRICATION OF HIGH STRENGTH SILVER ALLOY AND	M.S	0
	Investigation of Oxide Coated Cathode Fabrication Using Nanotechnology and Troubleshooting of the Oxide Coated Cathode	M.S	0
	STUDY OF CORROSION BEHAVIOR OF DIFFERENT BIOMATERIALS IN SIMULATED BODY FLUID	M.S	0
	Investigation of Localized Corrosion in Marine Aluminum in the Region of Bolts and Rivets	M.S	0
	Fabrication and Investigation of the Corrosion Resistance of specimens Manufactured by Nanostructured High Nitrogen Austenitic Stainless Steel powders at different Chloride ion Concentrations	M.S	0
	Preparation of Al-substituted Ni ferrite and study the effect of composition and grain size on relative magnetic permeability	M.S	0
Zahra Afifi Tasuji	Evaluation of The Characteristics of Double-Layered Al2O3 and HA- Al2O3 Ceramic Coatings on 316L Stainless Steel by Plasma Electrolytic Process	M.S	0
Masoud Akbari baseri	Influence of Heat Treatment on the Dynamic Behavior of Al-6061	M.S	0
Sepehr Aliabadi	Evaluation of different sealing methods on corrosion behavior of anodized aluminum marine alloys(6061,5083)	M.S	0
Adnan Alizade Naeini	Manufacturing bilayer artificial skin in application to the Wound healing	M.S	0
Shaghayegh Aloustani	Manufacture of nanostructured austenitic nitrogen stainless steel, fabrication and characterization of bioactive nano-composite coatings on it for use in knee implants	M.S	0
Rasool Amini	Production, Structural Properties Investigation, and Pitting Corrosion Behavior of a new Fe-Cr-Mn-N Stainless Steel Group with Amorphous/Nanocrystalline Composite Structure	Ph.D	0
mohammad asgharzadeh	INVESTIGATION ON DISBONDING OF THREE-LAYER POLYETHYLENE COATINGS FOR GAS PIPES	M.S	0
AmirAli Ashraf	Fabrication and characterization of polyvinyl alcohol and nanoparticle hydroxyapatite biocomposite scaffolds	M.S	0
Ehsan Askari Bajestani		M.S	0
Mehdi Attar	Investigation of the effects of dynamic DC stray current on corrosion of coated steel pipelines in the soil	M.S	0

Showing 1 - 20 of 182 results.

Items per Page 20

First Previous Next Last

Teachers

Staff

Students

افراد

Faculty Members

Teacher description

Articles And Books

Articles

Conferences

Offered Courses

Thesis

Useful links

دفاتر و مراکز